Hopper Systems
Hopper systems type VNBThis so-called vibration hopper stores parts and feeds
them to the sorting device via an oscillating conveyor drive.
A smooth hopper chute made of V2A steel prevents parts
from getting stuck.
Hopper systems type BBR-iCharacteristic for this horizontal belt hopper is the
compact design with a filling volume of 10 to 30 liters.
Special lateral guides prevent small parts from getting
stuck.
Hopper systems type BBVThe combination of low filling height and high height of
transfer point is typical for the BBV type, referred to as
an elevator. It is especially well suited for lighter parts.
Hopper systems type BBRThe wide conveyor area and the specially shaped bulk
hopper of the belt hopper reduce the probability that
parts will jam. Ideally, it is used for lightweight parts.
Hopper systems type BSF-1This classical elevator with a metal-linked belt was
specially designed for feeding heavy steel parts. Despite
the high height of transfer points, very low filling heights
can be realized.
Hopper systems type BBHThe horizontal belt hopper of type BBH has side walls
made of steel sheet metal. With charges up to 500 kg
and the transport of sharp-edged parts, among other
things, it performs heavy-duty work.
Hopper combination type BSF-1 and type BBHWhen large part volumes have to be stockpiled, the
combination of the types BBH and BSF-1 is ideal. The
autonomous running time can be prolonged decisively
by this.
Grimm Zuführtechnik GmbH & Co. KG | Robert-Bosch-Str. 3 | D-78549 Spaichingen